Type VL – Type V with flange for motor mounting

Type VL – Type V with flange for motor mounting
FEATURES
Gear ratios: i = 1:1 up to 6:1
Maximum output torque: 2310 Nm
8 gearbox sizes with edge lengths of 065 up to 260 mm
Low-backlash design: less than 6 angular minutes possible.
Suitable for the mounting of IEC standard motors
Drive side with hollow-bored shaft and flange
Housing made of grey cast iron or steel

CONSTRUCTION TYPES

GEARBOX SIDES

ORDER CODE

Type Size Gear ratio Construction type Fixing side Installation position Speed

n2

 Design
VL 065 1:1 C0- 1. 1- 1500 /0000
Description Size
Table 6.5.5‑1		 Table 6.5.5‑1 Figure 6.5.2‑1 Gearbox side on which fixing is made; Table 6.2.3‑1;
Figure 4.2.1‑1 Gearbox sides		 Gearbox side pointing downwards; Figure 4.2.1‑1
Gearbox sides		 Slowly rotating shaft;
Table 6.5.5‑1		 Standard
D120 /14×30
Flange diameter Shaft diameter x length

 

TYPE OVERVIEW